Hello astee,
Sorry I didn’t get back to you sooner as I had forwarded your logs up to our analyst to review. Here is what we can try to get it so you can update the firmware.
- What I need you to do is to power off the ML back the LCB out of the unit.
- Once that is done then need you to power on the ML. Note you will get a bunch of RAS tickets which is normal due to no LCB.
- Wait about 10 minutes then power down the ML and reseat the LCB.
- Power on the ML and let it boot up normal
- Once you is at a ready state then clear all RAS tickets and then try to load firmware
If you are still not able to get the firmware to load then the issues is going to be either the LCB or the CF card that will need to be replaced. Now due to your system being OOW as long as it is still working you will need to decide if you want to purchase a new LCB& CF card as they are sold in a kit but can be expensive.
Please let us know if you have any other questions.