Re: PV 124t with BackupExec - TAflag[12] Unsupported Format
Also, drive type is LTO 2 Version 1914, Firmware version 63.0HW/ME Rev 1/1
View ArticleRe: PV 124t with BackupExec - TAflag[12] Unsupported Format
I will send you a Direct email so you can attach the log file and send it over to me. I look forward to hearing from you.
View ArticleRe: MD3000i firmware issue.
I will send you a direct email as I would like for you to pull a support bundle and email it to me. That way I can look into this a little deeper so I can see what is causing your issue for you. Please...
View ArticleRe: MD3000i firmware issue.
Thanks for the reply, I actually was able to get them update to the 7.35 firmware last night by taking a spare controller that has the latest firmware, making disk groups so it would be the main. Put...
View ArticleRe: MD3000i firmware issue.
The main thing is that you were able to get the issue resolved and that is great to hear. You are right that with the problematic controllers out of the system it would be very hard to find out what...
View ArticleRe: Powervault MD3000 stuck with solid amber "reset state"
Do you still have access to the GUI management console? If so I would like to get a support bundle as there are a number of things that could cause this, as it looks like you are in a boot loop. I will...
View ArticleRe: MD3220 will not bring up Service Interface
I've tried your suggestion with no luck. I've logged in via serial port on all of these controllers. Five out of seven enter Client error lockdown. The error is "SBB ICID value bad". I'm not sure if...
View ArticlePE-T610 with RD1000 Slow Performance
Hello,The performance on our RD1000 has degraded significantly. We use the internal RD1000 on our SBS 2011 server to backup using Backup Exec 2010 R3. Assuming the performance issue might be caused by...
View ArticleRe: MD3000i appears to be only using 1 controller
Thank you so much for the info! I had no idea that there was actually an "Owner" of the disk groups. I thought both controllers could access all of the LUNs simultaneously. In this particular setup we...
View ArticleRe: PE-T610 with RD1000 Slow Performance
If you would can I have you pull a DSET report from the server the RD1000 is connected to and also get a job log. Another question I have is what are you backing up with this solution? How does this...
View ArticleRe: PE-T610 with RD1000 Slow Performance
Hey Kenny,It's internal so I'm assuming it's SATA. Let me run the DSET and I'll send it over to you.Thanks,Justin
View ArticleRe: PE-T610 with RD1000 Slow Performance
I have the DSET all ready. I don't have an email from you though.
View ArticleRe: PE-T610 with RD1000 Slow Performance
After looking over the DSET and log files and the issue doesn't look to be on the hardware. You mentioned you have compression enabled on the drive. I would recommend that you enable compression in the...
View ArticleRe: PowerVault 122 LTO Barcode Reader
thank you,i'd prefer this barcode reader in c# , check the tutorial and codes. hope it is what you are looking for.
View ArticleML6000 Tape drive bar code lable has come off
Rreceived RAS tickets T019 and T020, when looking inside the library, I could see that the -1 drive lable was peeling off. Suspect this is the cause of the calibrate errors.What glue type should I use...
View ArticleMD3200i SODReboot lockdownmd
Hello,I have a problem exactly as posted in this thread: http://en.community.dell.com/support-forums/storage/f/1216/p/19499337/20333114.aspx (Controller entering SODReboot lockdown state..) From the...
View ArticleRe: md3200i controller WARN: Controller entering SODReboot lockdown state..
Hello, Goddy_D, Sam.I have similar issue (en.community.dell.com/.../20427849.aspx) and cannot log into the console shell (after pressing S nothing happens). Could you please help me?
View ArticleRe: MD3000i appears to be only using 1 controller
Raid 5 read performance increases with more drives, but raid 5 write performance decreases with more drives.Most raid controllers typically achieve the best overall raid 5 performance with 6-7 drives...
View ArticleRe: PV 124t with BackupExec - TAflag[12] Unsupported Format
I resolved my own issue in getting the information you requested.We had asked for a changer with an LTO-3 drive and dell sent us the one with an LTO-2 drive, I just assumed it would be what we asked...
View ArticleRe: ML6000 Tape drive bar code lable has come off
If the label looks to be coming off that could be causing this issue. Do you know if the unit is currently under warranty? If it is NOT under warranty I would suggest to use something clear and not too...
View Article