unable to install Hyper-V server over iscsi
colleagues, good dayI have standalone hyper-V server 2012 R2 media for installation and a server (R720) which can be configured to boot from iSCSI (No local HDD) from BIOS.I have done the configuration...
View ArticlePowerVault LTO4-120HH error code 6 help
I have an error code 6 on my tape unit and I can't get the tape out. Currently a cleaning tape is inside of the unit. Any Ideas on how to clear the error and get the tape out?
View ArticleTL2000 getting 0x84 Tape Alert.
We have a TL2000 and we are getting to email alerts on every Friday (the full backup days). During the week everything runs just fine. Below are the email alerts the we receive from the unit. they are...
View ArticlePowerVault not detecting on Redhat server
Hi thereI have two redhat servers and one SAN PowerVault MD 3400storage I installed MD software both the servers and it automatically asked for Installation of Disk poolsand after installation i create...
View ArticleRD1000 Issue
I have a RD1000 that I've been using with Backup Exec on a Windows 2008 server for several years. I lost one of my disks and purchased a new disk. However, each time I insert this NEW disk, it...
View ArticleMicrosoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) Drivers
HiI am looking for drivers for the above system but seem to go round in circles on the usual dell support website.OMSA is telling me that the minimum driver I require is 2.24.00.32 but I cannot seem to...
View ArticleConterller Firmware update
I have been trying to update the firmware on a dual controller MD3200. The "Powervault MD Storage Software" will not perform the update.Current Firmware Version is: 08.20.05.60I have loaded 3...
View ArticleServer doesn't see second magazine of TL2000
This has me stumped.New linux server, new LSI MPT fusion SCSI card (parallel SCSI), hooked up to a TL2000.I run "mtx -f /dev/sg4 status" and it only shows me the left magazine.The right magzine is...
View ArticleHow I can install SO on NX3100?
Hi, I have a NX3100 and I created a new Raid, but i erased the SO, How i can install the same SO?, when i try install, the NX3100 say that drive dosnt see.
View ArticlePowerVault MD3200i : "Raid Controller module as gone to failed state"
Hello,We've got this alert "Raid Controller module as gone to failed state".But MDSM is green, and Guru doesn't display any error.A month ago we've got this:Node ID: san4Host IP Address:Host ID:...
View ArticleFree space recovery on diskpool
Hi, how can i recover free space in a diskpool with thin provisioning? Is there a defrag command for diskpools? I can only find defrag commands for disk groups.Carl
View ArticleWindows Storage Server 2008r2 Backup not working on Dell NX3100
1. Is it possible to keep multiple backup copies when backing up to network drive?I realize that Windows Server Backup cannot keep multiple backup copies (unless backing up to local drive instead of...
View Articlemd3200 issues
First i am unable to connect through MD manager. Do both management ports need to be configured and connected? Enclosure shows up in 6g adapter but thats it.Second, one encloure has a controller on...
View Articlemd3200/3200i
Unable to connect through MD Manager. Enclosure shows up in 6G HBA but that is all. Do both management ports need to be configured and connected? Connecting to R710.Also, how does one clear the...
View ArticlePE R710/ PERC H800/ MD 1200. 2 RAID 10s use the same drives
Hello Everyone, I have this weird situation. I have a PowerEdge R710 server with two PERC H800 cards, the PERC H800 cards are connected to a PowerVault MD1200. Here is how everything is setupFirst PERC...
View ArticleHopefully quick MD1000 question.
Have a poweredge server connected to an MD1000 via a perc 5/e. This is no longer a production server, but it has some old data that they like to query occasionally. It seems that the battery on the...
View ArticleMD1200/PERC H810 not seen in Nautilus A49 DOS updater
Trying to get 12-4TB disks to update their firmware attached to an R610, and it simply is not seeing them. Is this systematic? I can see the controller and drives just fine during POST, just not once...
View ArticlePV 132T Firmware Update
Hello;I have a PV132T im trying to update but I tried to run the IBM LTO-TDX Tape Drive Tool and receive a error " No IBM LTO-TDX Tape Drive were found"The operating system is a Windows Server...
View ArticleMD3000i Raid Controllers down (iSCSI ports reset loop) after power outage
Hello,Unfortunately we have experienced a power failure this week and our UPS shut down before the power came back. After that our MD3000i RAID controllers went down and it seems they are stuck in a...
View ArticleMD3000i controller troubles
Hi,It seems that my MD3000i continues having controller problems. I'm receiving tons of critical errors via email notification, but every time I go into MDSM - the status is optimal. The error messages...
View Article
