TL1000 - Restore defaults
Hello,I forgot the 4 digits pass to unlock TL1000. I have the web access, but, i don't know how can i restore defaults. Don't have any options about it.Thanks
View Articlemd3000 degraded drive channel
my md3000 is telling me:Degraded Physical Disk ChannelStorage array: SAN_01 Degraded physical disk channels: 0, 1I've collected a 542kb Support Bundle...but this forum has a 500 kb upload limit,...
View ArticleWhich PowerEdge Lowest Noise?
I have a PE T610 that is used as a workstation and is installed in a habitable room rather than in a dedicated server room.Fan noise is a little on the high side so i am looking for ways slow down the...
View ArticleMax disk size in a PowerVault MD1000?
The latest support matrix -- last updated in 2012 -- shows only 2TB drives.We are approaching the year 2016. Is 2TB still the maximum drive size usable in an MD1000? Is there any reason that filling...
View ArticleProblems with PowerVault TL2000 and IBM ULT3580-HH3
Hello, Could you help me with the following problem:Since a couple of weeks ago suddenly my unit started failing and the backup software (backup Exec 2010) shows tape alerts frequently.I've updated the...
View ArticleDell Powerfault MD 1220 - Cannot Read Data
Dell Powerfault MD 1220 - Hard drive shows data but cannot access. Disk Manager says to Initialize. This sits at a Datacenter offsite. I'm told there are Amber lights flashing and I just found out its...
View ArticleDirect-Attached MD3860f Array, 60x 8TB drives, and creating a 300 to 400 TB...
(repost from the EQ forum, where I put this the first time, by mistake)We're extending the storage for a PE 730xd backup server with 24 internal drives by adding an FC-attached MD3860f aray, with 60x...
View ArticleML6000 how to reset admin password
Admin/password doesn't work on web UI, How do we reset this on a ML-6000?
View ArticleMD3200 cant see host identifier in MDSM
I has a Windows failover cluster consists of 2 PE 720 servers and MD3200 SAS array and I need to upgrade it to 2012R2 from 2012. Also I have MD3600i connected to this cluster for temporary VM storage...
View ArticlePowerVault hardware snapshot provider seems buggy - it crashes a lot, with...
Hi, The PowerVault management DVD includes a hardware snapshot provider for Windows, so 3rd party software can make the SAN take snapshots.This is crashy and unreliable for me, and appears to have...
View ArticleBackup Solution Advice Needed
I need some advice on the following backup requirement and would like to know the various available options. I need to propose a solution to meet this requirementsLocal Site: A Backup Server with SAN...
View ArticleMD3620f - How to access the mapped virtual disks
Hi there,I've recently configured and mapped virtual disks on my dell powervault md3620f using the Modular Disk Storage Manager software on a Windows Management Station , but I don´t know how to...
View ArticlePowerVault MD3200 - Error 434
I've just received a Dell PowerVault MD3200 with 12x1TB hdd. I'm getting the error 434It is a refurbished and for the shipping, the disks has been removed and then re-inserted (maybe not in the proper...
View ArticleMD3600i Disk Group Failure Can't Replace Physical Disk
I have an MD3600i with 5 disks in a RAID5 Disk Group. Two of the disks display as having gone bad. I replaced both disks with spares and tried to follow the Recovery Guru procedure in the Array...
View ArticleOMSA not seeing Perc H810 controller
I have installed a Perc H810 controller with a MD1200 array on an IBM X3850 M2 server, running Windows Server 2012. Windows can see the controller and configured arrays and can access the raid volumes...
View ArticleMD1400 Enclosure Split Mode Capability?
Does the MD1400 support split mode?I'm wondering...
View ArticleCan some one help me out ?
I created the cable exactly the way the diagram says, Twice !!Tested it with my multi meter and the pins are connected correctly from end to end ... I connected it to Serial port and MD300i end .......
View ArticleTL2000 + iSCSI bridge
I've started reading some manuals but it's not clear yet to me - probably pipe wishes - but having iSCSI bridge installed is user able to use both interfaces, SAS and iSCSI ?regards
View ArticlePowerVault MD3620f launches "SCSI Command Error"
Hello,I have a MD3620f with two controllers (slot 0 and slot 1), configured with 3 virtual disks, where two of them have preferred path as slot 0 and the other (the third VD) uses the slot 1 as...
View Article